Zhuhai highlight 2835 LED strip design

LED (Light Emitting Diode, abbreviated as LED, the Chinese name is light-emitting diode.) Light strip refers to the assembly of LEDs on a ribbon-shaped FPC (flexible circuit board) or PCB hard board. In terms of lighting quality, because the LED is cast Light lamps have no heat, ultraviolet and infrared radiation, and will not harm exhibits or commodities. Compared with traditional light sources, lamps do not require additional filtering equipment, the lighting system is simple, the cost is low, and the equipment is easy to install. Its precise lighting can be used as a substitute for optical fiber lighting in museums. The highlight 2835 LED strip is named after its product shape is like a strip. Because of the long service life (generally the normal life is 80 to 100,000 hours), green and environmental protection, LED light strips have gradually emerged in various decoration industries. LED light strips need to be driven by a power supply to emit light. Highlight 2835 LED lights with LED lights with round two wires and round three wires , Flat three-wire, flat four-wire, etc. Usually the second-wire light strip is round, the three-wire and four-wire are flat, the round one is suitable for outdoor occasions, and the flat one is mostly used in outdoor places. Attention should be paid to choosing suitable LED lights with card slots during interior decoration to decorate a more beautiful space. There are also many types of colors, including cool white, warm white, yellow, etc. Different colors of lights bring different feelings and warmth. There are warm colors, cold colors and so on. When the voltage drop of the LED drive power supply is relatively large, the brightness of the LED strips that are connected for too long will be inconsistent at the beginning and the end. Quick judgment method: connect the required length, light up the light strip, arrange them side by side for comparison, observe with eyes. The bull LED light strip adopts dome refraction technology to provide uniform light and avoid dark areas. How to see the consistency of light color? You can find a piece of white paper, vertically close to the LED light-emitting surface, carefully observe the light and shadow on the white paper, as a lighting supplement, the color of the light strip and the main indoor light source cooperate with each other to make the home brighter. As long as you choose the right color of the light strip, the feeling at home must be more warm. But when choosing a light strip, we must reduce light pollution, and try to choose a cold light source light strip with less pollution. Avoid choosing high-temperature light sources such as spotlights, because high-temperature light sources will heat up after a while, attract dust, and even cause the surrounding area of u200bu200bthe light strip to become black, which is ugly and difficult to clean. Highlight the 2835 LED strip to determine whether the light color is consistent, isn’t it simple?