Zhuhai 3528led light strip manufacturer

During the decoration process, the lamp strip selection skills and the decoration effect are reflected. Introduction The lamp strip refers to the LED lamp is welded on the copper wire or strip-shaped flexible circuit board with a special processing technology, and then connected to the power supply to emit light. Named from the light belt. The power of 3528led light strip 2835led light strip is about 15W. The LED light strip is assembled with FPC as circuit board and assembled with SMD LEDs, so that the thickness of the product is only the thickness of a coin. The general specification is 30cm long, 18 LEDs, 24 LEDs and 15 LEDs, 24 LEDs, 30 LEDs, etc. with a length of 50cm. There are also 60cm, 80cm, etc. It can be cut and extended arbitrarily without affecting the light emission. During the decoration process, the lamp belt selection skills and decoration effect are introduced. When it comes to LEDs, energy saving is naturally its due. Since the 3528led light strips are connected to use, the length of each light strip can be connected, which has a lot to do with the width of the circuit and the thickness of the copper foil when designing. Because the current intensity per unit area is related to the cross-sectional area of u200bu200bthe line, if this is not considered when wiring, then when the connection length exceeds the current that the line can withstand, the light strip will heat up due to overcurrent. While damaging the circuit board, it also reduces the service life of the LED. For LED light strips, the importance of light efficiency has a lot to do with its application scenarios. The requirements for light efficiency are relatively not applied to large-area lighting. When the ceiling or showcase is high. As a professional LED strip, under the premise of color rendering index Ra> 80, the light efficiency should be at least 60 lm/W. Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether it will accumulate dust and whether it needs to have a sheath. 3528led lights with LED lights are usually high-voltage 220V, so they are wrapped with a thick layer of flame-retardant glue. Wires, circuit boards, etc. They are all made of copper, and LED lamp beads determine the life of the light strip. For the sake of electricity safety, you must not choose inferior quality because of the low price, which may be a safety hazard. Don't just see the advantages of the protective sleeve, its disadvantage is that it may lose a little light. So we must understand the product, understand the application place, understand the demand, and choose the right product.