Zhongshan Samsung 2835 LED strip manufacturer

When it comes to LED light strips, some owners may be very unfamiliar. Although some owners know but only know LED lights, they may not be familiar with other specific conditions. Samsung 2835 LED lamp with LED lamp with a single lamp bead damage will only affect the single lamp bead not bright, and does not affect the lighting effect, it is more and more recognized by the majority of users. The earliest process is to weld the LED on the copper wire, then put on a PVC tube or use the equipment to directly shape it. There are two types of round and flat. The title is distinguished by the number of copper wires and the shape of the light strip. Two wires It is called the second line, the circle is added with a circle in front, that is, the circle is two lines; the flat shape is added with the word flat in front, that is, the flat two lines. Today, I will borrow the information from the Shenzhen Lighting Factory Decoration Company to introduce one of the knowledge about LED light strips-the classification of LED light strips. Let's take a closer look now! The ED light strip is mainly installed in the lamp trough to create a large area of u200bu200bluminous ceilings and walls. The SMD5050 used in the Samsung 2835LED light strip is packaged with Taiwan's high-brightness chip, and the luminous flux is 1-2lm higher than ordinary chips. A 5050 lamp bead has three chips. When one chip is damaged, it will not affect the other two chips to emit light. When only three cores are damaged, only a group of three 5050s will not light up, which will not affect the entire light strip. Shaping the effect of wall washing, it is precisely because of its large lighting range, so once a problem occurs, it will affect a wide range of light and shadow effects. When choosing LED strips, we must keep our eyes open and choose carefully. Try the new favorite of home improvement-LED light strips. Samsung 2835LED light strips. The LED light strips produced by the regular LED strip manufacturers are produced by SMT patch technology, using solder paste and reflow soldering processes. Therefore, the solder joints on the LED light strip are relatively smooth and the amount of solder is small, and the solder joints extend from the FPC pad to the LED electrode in a circular arc shape. The counterfeit version of the LED strip has an uneven amount of solder in the solder joints, and most of them appear as a dot to cover the solder feet, and at the same time there will be different degrees of tin tips, which is a typical phenomenon of manual soldering. Installation is flexible and changeable. How to choose high-quality LED light strips is all here-the lighting factory.