Zhongshan 2835led light strip wholesale

Decorating a house is a painstaking task. How to outline the space curve to the utmost extent and achieve the perfect fusion of space and light is an important part of decorating a house. 2835led strips The LED strips produced by the regular LED strip manufacturers are produced by SMT patch technology, using solder paste and reflow soldering process. Therefore, the solder joints on the LED light strip are relatively smooth and the amount of solder is small, and the solder joints extend from the FPC pad to the LED electrode in a circular arc shape. The counterfeit version of the LED strip has an uneven amount of solder in the solder joints, and most of them appear as a dot to cover the solder feet, and at the same time there will be different degrees of tin tips, which is a typical phenomenon of manual soldering. When installing a house, many people spend a lot of time choosing the living room chandelier, but they neglect the decoration of the LED light strip. Choosing a good LED light strip can play a finishing touch. So how to select and lay out LED strips? ED light strips are mainly installed in the light trough to create large-area luminous ceilings and walls. 2835led light strips LED light strips specifications and models list adopted LED size model: 2835 (2.8*3.5mm) 5050 (5.0*5.0mm); LED Colors: red, green, blue, yellow, white (warm white, cool white), full color. Number of LEDs per meter: 5, 10, 15, 20, 30, 40. . . Input voltage: 12Vdc, 24Vdc shape the effect of wall washing, it is precisely because of its large lighting range, so once a problem occurs, it will affect a wide range of light and shadow effects. When choosing LED strips, we must keep our eyes open and choose carefully. Try the new favorite of home improvement-LED strips, 2835led strips LED strips have a fixed number of beads per meter. 1210 is 60 lights, 5050 is 30 lights. If there are special requirements, if 50 lights per meter, it is necessary to modify the circuit. Usually it is a group of 3 LEDs. If it is 50 lamps, there will be a group of insufficient quantity, but if it becomes a group of two LEDs, the resistance of the current-limiting resistor will be increased, which will cause a waste of resources. Therefore, when customizing LED strips, be sure to pay attention to the number of lamp beads is a multiple of 3, installation is flexible and changeable. How to choose high-quality LED strips is here-the lighting factory.