Zhanjiang waterproof 5630led light strip processing

When it comes to LED light strips, some owners may be very unfamiliar. Although some owners know but only know LED lights, they may not be familiar with other specific conditions. Waterproof 5630led light strip LED light strip was born in recent years with the development of LED technology. When there is no LED light strip, T4 and T5 tubes are used for backlighting, but the minimum size of T4 and T5 tubes is 0.3 meters, which means that if there is less than 0.3 meters, there will be a dark area, and the LED strips emit light evenly and can be cut according to the actual length, which is very convenient. Today, I will borrow the information from the Shenzhen Lighting Factory Decoration Company to introduce one of the knowledge about LED light strips-the classification of LED light strips. Let's take a closer look now! LED specifications: use super bright patch LED light color: waterproof 5630led light with LED2835 0.2w light with board, when the whole board is tested, there are a few lessons when it does not light up, there are two possibilities for a single test to light up, the first is the light There is an open circuit on the part of the lamp bead connection circuit on the board; the second is that the lamp bead itself is faulty, and a single lamp can be lit with a low current test, which does not mean that the entire board is working normally. Inspection method: Firstly, check whether the circuit between the lamp beads on the lamp board has an open-circuit and virtual soldering state, and then replace the lamp board to test whether the lamp bead of the lamp board is faulty. Red/yellow/blue/green/cool white/normal white/natural white/warm white/RGB/special color/special color temperature, power supply, controller and other ancillary products can be provided. How to see the consistency of light color? You can find a piece of white paper, vertically close to the LED light-emitting surface, and carefully observe the light and shadow on the white paper. The flexible LED strip is assembled with FPC as a circuit board and assembled with SMD LEDs, and the thickness is only the thickness of a coin; Common specifications include 30cm long 18 LEDs, 24 LEDs, and 50cm long 15 LEDs. There are also 60cm, 80cm, etc., which can be cut at will or extended at will without affecting the light emission. It can be bent, folded, and wound at will. It is suitable for irregular places and places with small spaces. You can judge whether the light color is the same by using a waterproof 5630led light strip. Isn't it simple?