Zhanjiang imported lamp beads 2835LED light strip wholesale

With the development of landscape lighting, LED strips have gradually emerged in the lighting industry because of their long service life and green environmental protection. It has become the new favorite of lighting engineering construction. Imported lamp beads 2835LED lamp strip LED rigid strip is assembled with PCB (printed circuit board) hard board, LED can be assembled with SMD LED, and can also be assembled with in-line LED, depending on different needs. Components. The advantage of the rigid light bar is that it is easier to fix, and it is more convenient to process and install; the disadvantage is that it cannot be bent at will and is not suitable for irregular places. Then, in the process of actual installation and use, sometimes the LED lamp belt is falsely broken, that is, the LED lamp belt is often said to be off. A comprehensive high-tech enterprise with LED lights with light bars as its core products. Imported lamp beads 2835LED strips The LED strips produced by the regular LED strip manufacturers are produced using SMT patch technology, using solder paste and reflow soldering processes. Therefore, the solder joints on the LED light strip are relatively smooth and the amount of solder is small, and the solder joints extend from the FPC pad to the LED electrode in a circular arc shape. The counterfeit version of the LED strip has an uneven amount of solder in the solder joints, and most of them appear as a dot to cover the solder feet, and at the same time there will be different degrees of tin tips, which is a typical phenomenon of manual soldering. We focus on various types of LED high-voltage light strips, low-voltage light strips, 5050, 2835, 5730, 3014 and other products. The lighting factory uses a dedicated continuous patch process to replace the PCB patch process to achieve efficient and automated production. British innovative research and development of high heat dissipation circuit board, imported lamp beads 2835LED light strip
Cut light strip
The LED light strip is a circuit structure composed of 3/6 LEDs in series and parallel, and every 3 LEDs can be cut and used individually.
The cutting method of the light strip is that the blank space of every 3 or 6 lights on the light strip is a cutting place. If you cut it in other places, it will damage the circuit of this section of the light strip and cause the light strip to be damaged. .
The luminous flux of its leadless LED light strip is increased by more than 100% compared with the traditional light strip, and the energy-saving effect is increased by 100%-200%, so that the LED light strip can truly achieve energy saving and high brightness, and become an ultra-high-brightness lighting-level light strip.