Zhanjiang highlight 2835LED strip processing
Cut light strip
The LED light strip is a circuit structure composed of 3/6 LEDs in series and parallel, and every 3 LEDs can be cut and used individually.
The cutting method of the light strip is that the blank space of every 3 or 6 lights on the light strip is a cutting place. If you cut it in other places, it will damage the circuit of this section of the light strip and cause the light strip to be damaged. .
When the voltage drop of the LED drive power supply is relatively large, the brightness of the LED strips that are connected for too long will be inconsistent at the beginning and the end. Quick judgment method: connect the required length, light up the light strip, and compare them side by side, observe with eyes. The bull LED light strip adopts dome refraction technology to provide uniform light and avoid dark areas. The light strip is not only beautiful, but also can increase the auxiliary lighting of the space. Highlight the 2835 LED light strip and pay attention to the connection distance of the LED light strip:
Generally speaking, the longest connection distance of 3528 series LED light strips is 20 meters, and the longest connection distance of 5050 series LED light strips is 15 meters. If the connection distance is exceeded, the LED light strip will easily heat up, which will affect the service life of the LED light strip during use. Therefore, when installing, it must be installed in accordance with the manufacturer's requirements, and the LED lamp must not be operated with overload. Make the space brighter and easier to highlight personality and style. Visually it is more spacious and brings an unparalleled and wonderful view to the interior.