Zhanjiang constant current 2835led light strip wholesale
Cut light strip
The LED light strip is a circuit structure composed of 3/6 LEDs in series and parallel, and every 3 LEDs can be cut and used individually.
The cutting method of the light strip is that the blank space of every 3 or 6 lights on the light strip is a cutting place. If you cut it in other places, it will damage the circuit of this section of the light strip and cause the light strip to be damaged. .
When the voltage drop of the LED drive power supply is relatively large, the brightness of the LED strips that are connected for too long will be inconsistent at the beginning and the end. Quick judgment method: connect the required length, light up the light strip, and compare them side by side, observe with eyes. The bull LED light strip adopts dome refraction technology to provide uniform light and avoid dark areas. The adjustable temperature 3014 LED light strip also ensures the color gradation of the light from the bottom to the top of the ceiling. The constant current 2835led light is installed with the LED light strip, which is generally fixed with 3M glue. Installed outdoors, often in wind and rain, over time will reduce the adhesiveness and cause the LED light strip to fall off. Therefore, the outdoor installation usually adopts the method of fixing with the card slot, and the place that needs to be cut and connected is the same as the indoor installation. , Just need to be equipped with waterproof glue to consolidate the waterproof effect of the connection point. Then use a special fixing clip to fix it, you can use an electric hammer to drill the eye, use a plastic expansion tube and screw to fix the clip
In addition, the double-sided light box lens 3535 LED light strip that illuminates the ridgeline of the relief can highlight the architectural details of the ceiling space. The whole is natural and unique.