Zhanjiang 5630 led strip production

When choosing led light strips, many people are concerned about whether it is consistent with the home style, and how about the price and quality. 5630led light strips Smart LED light strips can be easily attached to the midsole of the shoe body, and after the power is turned on, it can flash colorfully Colorful glare; at the same time, its built-in accelerometer can change the flashing method and color according to the walking speed or the change of the toe and heel. This way, walking on the street will inevitably become the focus of everyone's attention. . What should you pay attention to when buying led strips? Shenzhen Lighting Factory will let you know about it. The LED light strip needs to be driven by a power supply to emit light. The 5630led light strip is installed with the light strip first to cut out the appropriate amount of light strips according to the required length, and then directly insert the side of the light strip without the patch position into the thread needle. When connected to the plug, the plug can be energized for use. In this process, it should be noted that the access point must be checked repeatedly to avoid leakage of water. When the voltage drop of the LED drive power supply is relatively large, the brightness of the LED strips that are connected for too long will be inconsistent at the beginning and the end. Quick judgment method: connect the required length, light up the light strip, and compare them side by side, observe with eyes. The bull LED light strip adopts dome refraction technology to provide uniform light and avoid dark areas. LED is a semiconductor light-emitting diode. LED energy-saving lamps use high-brightness white light-emitting diodes, which have high luminous efficiency, low power consumption, long life, easy control, maintenance-free, safe and environmentally friendly; 5630led light strips need to be connected because the led light strips In use, how long each type of light strip can be connected has a lot to do with the width of the circuit and the thickness of the copper foil when designing. Because the current intensity per unit area is related to the cross-sectional area of u200bu200bthe line, if this is not considered when wiring, then when the connection length exceeds the current that the line can withstand, the light strip will heat up due to overcurrent. While damaging the circuit board, it also reduces the service life of the led. It is a new generation of solid cold light source, with soft, bright, colorful, low loss, low energy consumption, green and environmental protection, suitable for families, shopping malls, banks, hospitals, hotels, restaurants He illuminates all kinds of public places for a long time.