Zhanjiang 3014LED flexible light bar manufacturer

The LED light strips are generally designed in the grooves on the top, wall, or ground. The light is always blocked and projected and reflected to see good results. 3014LED flexible light bar LED hard light bar is assembled with PCB (printed circuit board) hard board, LED can be assembled with SMD LED, and can also be assembled with in-line LED. Different components are used according to different needs. . The advantage of the rigid light bar is that it is easier to fix, and it is more convenient to process and install; the disadvantage is that it cannot be bent at will and is not suitable for irregular places. Therefore, the effect of LED light source is generally very soft and romantic, and it can have a variety of colors. In addition to enriching the space and lighting, it also has the function of dividing space and highlighting key decorations. General light strip products provide 3000K and 4000K color temperature for selection. 3014LED flexible light strips are used because the LED light strips are to be connected. The length of each light strip can be connected, which has a lot to do with the width of the circuit and the thickness of the copper foil when designing. Because the current intensity per unit area is related to the cross-sectional area of u200bu200bthe line, if this is not considered when wiring, then when the connection length exceeds the current that the line can withstand, the light strip will heat up due to overcurrent. While damaging the circuit board, it also reduces the service life of the LED. Bull LED strip products have 3 color temperatures to choose from, 3000K, 4000K and 5700K. Hotels, high-end shopping malls and home furnishings can choose a low color temperature below 3000K to create a warm atmosphere; the office can choose a cold light source with a higher color temperature. To do a good job of LED light strips need to include various factors such as craftsmanship, technology, and service. 3014LED flexible strip LED strips are generally high voltage 220V, so they are wrapped with a thick layer of flame-retardant glue. Wires and circuit boards are generally made of copper. LED lamp beads determine the life of the strip. For the sake of safety in electricity use, you must not choose inferior quality products just because the price is cheap, which may result in potential safety hazards. Many companies will choose to abandon the production of this product for short-term profit considerations. The lighting factory is not afraid of hardships and marches forward courageously on the LED light belt.