This safe LED downlight is stable, anti-falling, and reassuring! ||

Today, I specifically talk about the safety and fixity of LED downlights, which everyone usually overlooks. This is directly related to the fall-proof performance of LED downlights, and it is more related to the 'personal safety' of the general public! From the point of view of the application places of LED downlights, it is often used in large quantities and widely in airports, high-speed rail stations, subway stations, hotels, supermarkets and other spaces, involving the ceiling height of meters, if there is a sudden drop of the downlight. , To estimate based on the principle of gravitational acceleration, it will definitely cause great harm to personal safety. And this kind of dangerous event is not fictitious. In recent years, there have been frequent accidents of lamps falling. From various metal parts of lamps (such as face rings, lampshades, etc.) to the entire lamp, there are sudden precedents. Think carefully! If you think this news is scary enough, then the fall accidents caused by lamps such as LED downlights, LED spotlights and other large-volume, large-area applications, the consequences are extremely terrible. High-speed rail station lighting. Therefore, please pay attention to the reliability of the fixed structure of the downlight when selecting the model. Take the IF-IDL series of LED downlights from Optoelectronics as an example, let’s see if a LED downlight with a stable and reliable installation and fixed structure is What does it look like? The IF-IDL series of photoelectric LED downlights follow the scientific design of the stress point, and the clasp-shaped fixed structure. In order to better prevent the lamp from falling accidents, the Ru0026D team of the Optoelectronics Division has developed a very special lamp fixed structure diffuser board. ring. In the process of research and development, we found that the traditional downlight has a sudden drop risk, to a large extent, because its screw 'point-like' fixing method is difficult to carry the weight of the lamp body. Therefore, we need to accurately calculate each stress point of each component structure such as the lamp body, mask, and clasp, and add anti-resonance and anti-fall strength considerations, and replace the cup-shaped design of the old-fashioned LED lamps with spring steel clasps , The diffuser plate of the downlight is firmly fixed to prevent the trouble of shaking and sliding. Of course, this has also become a patented design of Optoelectronics smoothly. Excellent light efficiency The IF-IDL series LED downlight has uniform spot, no stray, smooth halo transition, and the beam angle is a wide beam angle, which is °. After such a downlight is installed, it will not form shadows and dark areas on the ground. It can ensure sufficient illuminance, the luminous flux reaches lm, the luminous efficiency is greater than lmW, and the low luminous attenuation can create a satisfactory lighting effect. From the above, it can be seen from the above that the LED downlight is suitable for large-scale installation and use in various occasions, and it keeps hidden safety hazards out. In addition, there are some special places where resonance is prone to occur (such as high-speed railway stations, etc.), and sufficient safety reinforcement measures must be taken. Therefore, do not ignore the fixed structure of the LED downlight when selecting! Introduction Optoelectronics focuses on lighting design, production and construction, providing overall solutions for LED lighting projects such as airports, hotels, commerce, and offices, and is the designated lighting supplier for major domestic airports. ---Fax Address