The advantages of lighting factory lights

Compared with the traditional light source, the lighting factory lamp has the following points: 1. Traditional lighting source has not been able to break through the energy consumption caused by the electrode and filament due to its own technical defects, which affects the service life of the light source; while the lighting factory lamp Because there are no filaments or electrodes inside the bulb, the life of the lamp depends only on the electronic components, and the general life span can reach 60,000 to 100,000 hours, which truly achieves a long life. 2. The significant power-saving performance of lighting factory lamps is 80% energy-saving than ordinary incandescent lamps, 60% energy-saving than metal halide lamps, and 20% energy-saving than ordinary energy-saving lamps; 85W lighting replaces 150W metal halide lamps (high-pressure sodium lamps). Under the same visual conditions, the overall energy saving is greater than 60%; installing the same number of lights and using lighting factory lights can reduce the current of the output circuit by more than 4 times, and the capacity of the transformer is also greatly reduced. 3. As the working frequency of lighting factory lamps is as high as 2.65MHZ, there is no stroboscopic at all. Compared with traditional light sources, it will not cause eye fatigue. 4. It can be started at low temperature, and the lights of the lighting factory can be started and restarted immediately. The starting time is less than 0.5 seconds. It is not restricted by frequent switching, and there will be no obvious light decay caused by ordinary electrode discharge. Although traditional lamps are still in the trial promotion process as a green lighting lamp, their technology is not yet mature, and their luminous efficiency, color temperature and the ratio of high-pressure sodium lamps and low-frequency lighting are still far behind. They are used as decorative lighting and part of environmental lighting. There is no problem with it, but due to technical problems, it is not suitable for high-power lighting applications. After the lighting factory lamp was successfully developed in the last world year, its service life and quality have been verified and recognized over time.