Tell you all copper ceiling lamp installation skills

Q: How to install the all-copper ceiling lamp? Answer: 1. The Two thread ends connected to the power supply line of the living room ceiling lamp should have good electrical contact and should be wrapped with insulating adhesive tape respectively, and keep a certain distance. If possible, try not to put the two thread ends under the same piece of metal to avoid short circuit and danger. 2. It is suitable to install all-copper ceiling lamps in rooms with higher floors or vibrating ceiling. When installing ceiling lamps in masonry structure, embedded bolts or expansion screws, nylon plugs or plastic plugs should be used to fix them; Do not use wooden wedges. And the bearing capacity of the above fixing parts should match the weight of the ceiling lamp. In order to ensure that the ceiling lamp is fixed firmly and reliably, and can prolong its service life. 3. If the screw cap is used in the all-copper ceiling lamp, the wiring should also pay attention to the following two points: the phase line should be connected to the terminal of the center contact, and the zero line should be connected to the terminal of the thread; The insulated housing of the lamp cap should not be damaged or leaked to prevent electric shock when replacing the bulb. 4. Educate children not to throw balloons and other objects at the lamps indoors, so as not to hurt people or affect the decorative effect of the lamps. When installing all-copper ceiling lamps, special attention should be paid to the reliability of the connection between the lamps and the installation. The connection must be able to withstand four times the weight of the ceiling lamps without deformation.