Jieyang waterproof high voltage 2835LED lamp with consultation telephone

The LED light strips are generally designed in the grooves on the top, wall, or ground. The light is always blocked and projected and reflected to see good results. Waterproof high-pressure 2835LED strips currently commonly used LED strips are 3528 and 5050 strips (3528 refers to the size of the LED light source, 32mm long and 28mm wide, 5050 refers to the length and width of the LED light source are 50mm), both The difference is that the size is different on the one hand, and on the other hand, there are 3 LED chips in the 5050 lamp beads, so under the same number of lamp beads, the brightness of the 5050 LED lamp strip is 3 times that of the 3528 LED lamp strip. Therefore, the effect of LED light source is generally very soft and romantic, and it can have a variety of colors. In addition to enriching the space and lighting, it also has the function of dividing space and highlighting key decorations. With good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, and the light is uniform, and the brightness of the lamp strip should be consistent at the beginning and the end. Waterproof high-pressure 2835 LED lights with light strips can’t actually be used as the main lighting, but only play an auxiliary role. However, as people’s requirements for residential quality are getting higher and higher, many designers will choose to use light strips in space design. Improve the quality of the space, and the design of the light strip is more novel and beautiful. The surface that people look at most directly in the space is the wall. Add a light strip to the background wall of the living room or bedroom, and the soft light tube can give the space a calm and introverted temperament. The light color of the light strip should also be consistent. If you want the light to have a uniform luminous effect, you must choose a good color rendering index when purchasing. The color rendering index Ra> 80 is a requirement that a professional LED light strip must meet. This is also a requirement of the national standard GB50034-2013. The lighting factory is a high-tech LED lighting source company that integrates LED lamp beads research and development. It provides you with free lighting solutions for different venues and on-site guidance tests. Waterproof and high-pressure 2835 LED light strips are connected to each type of light. The length of the belt can be connected, which has a lot to do with the width of the circuit and the thickness of the copper foil when designing. Because the current intensity per unit area is related to the cross-sectional area of u200bu200bthe line, if this is not considered when wiring, then when the connection length exceeds the current that the line can withstand, the light strip will heat up due to overcurrent. While damaging the circuit board, it also reduces the service life of LEDs. Many years of industry experience. The company has a complete process system, checks the quality level by level, standardizes the implementation process, strictly controls the cycle, and delivers on time.