Jieyang no dark area 3014LED light strip supply

The light strip is generally installed in a dark groove, showing 'seeing the light but not the light'! Can make the space highlight the sense of hierarchy and increase the artistic conception! No dark zone 3014LED light with FPC quality. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off. If the temperature is too high during maintenance, the pad will fall off. The true face of the light strip is just like a tape. It uses an LED light source. As the name suggests, it is called an LED light strip. It can be turned on by connecting to the 220V mains, and it is fixed with a fixed card, so it is not difficult to install. General light strip products provide 3000K and 4000K color temperature for selection. In terms of materials, the 3014LED strip without dark area can be divided into two types: hard strip and soft strip. The advantage of the rigid light strip is that it is easier to fix, and the processing and installation are very simple, but this kind of light strip cannot be bent at will. The soft light strip of flexible material has good flexibility and can be folded and bent at will, but the price is more expensive. Bull LED strip products are available in 3 color temperatures, 3000K, 4000K and 5700K. Hotels, high-end shopping malls and home furnishings can choose a low color temperature below 3000K to create a warm atmosphere; the office can choose a cold light source with a higher color temperature. Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether it will accumulate dust and whether there is a sheath or not. The 3014 LED light strip with no dark area was born with the development of LED technology in recent years. When there is no LED light strip, it is used T4 and T5 lamps are used for backlighting, but the minimum size of T4 and T5 lamps is 0.3 meters, which means that if there is less than 0.3 meters, there will be a dark area, while the LED strips will emit light evenly and can be based on It is very convenient to cut the actual length. Don't just see the advantages of the protective sleeve, its disadvantage is that it may lose a little light. Therefore, it is necessary to understand the product, understand the application place, understand the demand, and choose the right product.