Jieyang led lights with consultation telephone

With the development of landscape lighting, LED strips have gradually emerged in the lighting industry because of their long service life and green environmental protection. It has become the new favorite of lighting engineering construction. The specifications of led strips are different. You must pay attention to the selection. The specifications mainly refer to the number of lamp beads per meter. For example, 72 means 72 lamp beads per meter. You can choose according to your needs and hobbies. The 1210 specification light strip has 60 LEDs per meter, the 5050 specification light strip has 30 LEDs per meter, and the special one has 60 LEDs per meter. The price of different specifications of LED light strips is different, which is also an important factor to distinguish the price of LED light strips. So, in the process of actual installation and use, sometimes there will be false damage to the LED light strips, which is often referred to as LED light strips. not bright. Light strips High-brightness, high-quality imported lamp beads High-end customized detailed product prices, led light strips look at the packaging. Regular LED light strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static and moisture-proof packaging bags on the outside. The counterfeit version of the LED light strip will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look closely at the reel, you can see that there are marks and scratches left by the removal of the label on the surface. Product pictures, etc. For product introduction information, you can directly contact the manufacturer to obtain specific information on high-end customization of high-brightness, high-quality imported lamp beads for the Samsung 2835 led strip. In today's LED lighting industry, market demands are becoming more and more diversified, and competition among companies is becoming more and more fierce. Seeking survival has become a top priority for companies. The led light strip LED2835 0.2w attached light strip board, when the whole board is tested, there are a few lessons that do not light up, there are two possibilities for a single test to light up, the first is that the local lamp bead connection line on the light board is open; the second is The lamp bead itself is faulty, and a single lamp can be lit with a low current test, which does not mean that the whole board is working normally. Inspection method: Firstly, check whether the circuit between the lamp beads on the lamp board has an open-circuit and virtual soldering state, and then replace the lamp board to test whether the lamp bead of the lamp board is faulty. Due to the long-term oversupply, consumers are no longer 'passive' in their choices, but are very keen on customized products. This is what we strive for, born for consumers.