Jieyang LED lights with consultation phone

Lamps and lanterns are inseparable in our family, and lamps and lanterns are used in some public places or office places. Now LED lights are more commonly used lamps, so there are many types of LED lights, and LED strips are also good. LED light belt LED light belt installation, generally use 3M glue to fix. Installed outdoors, often in wind and rain, over time will reduce the adhesiveness and cause the LED light strip to fall off. Therefore, the outdoor installation usually adopts the method of fixing with the card slot, and the place that needs to be cut and connected is the same as the indoor installation. , Just need to be equipped with waterproof glue to consolidate the waterproof effect of the connection point. Then use a special fixing clip to fix it, you can use an electric hammer to drill the eye, use a plastic expansion tube and screw to fix the clip
So Shenzhen Lighting Factory will introduce the safety of led light belts? How to choose led light belts? Let's take a look. LED light strips in the market are differentiated according to the lamp bead model. LED light strips are generally high voltage 220V, so they are wrapped with a thick layer of flame-retardant glue. Wires, circuit boards, etc. are generally made of copper Quality, LED lamp beads determine the life of the light strip. For the sake of electricity safety, you must not choose inferior quality because of the low price. If you are greedy for temporary cheapness, it may be a safety hazard! Of course, it is not ruled out that you can find good quality and cheap prices, but such an opportunity does not fall out of thin air. Common lamp beads are divided into soft and hard lamp bars according to the type of use. The shell of the flexible light bar is made of epoxy resin. Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether it will accumulate dust, whether it needs to have a sheath, and the LED light strip depends on the packaging. Regular LED light strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static and moisture-proof packaging bags on the outside. The counterfeit version of the LED light strip will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look closely at the reel, you can see that there are marks and scratches left by the removal of the label on the outside. Don’t just look at it. To the advantage of the protective sleeve, its disadvantage is that it may lose a little light. Therefore, it is necessary to understand the product, understand the application place, understand the demand, and choose the right product.