Jieyang double-sided light box lens 3535LED strip manufacturer

The LED light strips are generally designed in the grooves on the top, wall, or ground. The light is always blocked and projected and reflected to see good results. Double-sided light box lens 3535LED light bar LED2835 0.2w attached light strip board, when the whole board is tested, there are a few lessons that do not light up, there are two possibilities for a single test to light up, the first is that the local lamp bead connection line on the light board is open ; The second is that the lamp bead itself is faulty, and a single lamp can be lit with low current test, which does not mean that the whole board is working normally. Inspection method: Firstly, check whether the circuit between the lamp beads on the lamp board has an open-circuit and virtual soldering state, and then replace the lamp board to test whether the lamp bead of the lamp board is faulty. Therefore, the effect of LED light source is generally very soft and romantic, and it can have a variety of colors. In addition to enriching the space and lighting, it also has the function of dividing space and highlighting key decorations. Using a very soft PCB board with a thickness of 2MM as the substrate, the double-sided light box lens 3535LED strip light strip has accessories. The accessories generally include plugs (power supply), pins (for connection), and fixing cards (for fixing the light strips) The plastic clip) and the tail plug (the plastic sleeve that protects the tail of the light belt), these accessories are generally delivered by the merchant, but you need to negotiate with the merchant first, and don’t get less. Easy to install and fix. Flexible and convenient cutting makes construction and operation convenient, ultra-thin design, low-temperature light source, so that the product is more flexible in the selection and matching of auxiliary materials during the installation process. Try the new favorite of home improvement-LED light strip, double-sided light box lens 3535 LED light strip flexible LED light strip is assembled using FPC as a circuit board, assembled with SMD LED, the thickness is only the thickness of a coin; the general specification is 30cm long 18 LEDs, 24 LEDs, and 15 LEDs with a length of 50cm, etc. There are also 60cm, 80cm, etc., which can be cut at will or extended at will without affecting the light emission. It can be bent, folded, and wound arbitrarily, suitable for use in irregular places and places with small spaces. Flexible installation and endless changes. How to choose high-quality LED light strips is all here-the lighting factory.