Jieyang constant current 2835led light strip offer

LED (Light Emitting Diode, abbreviated as LED, the Chinese name is light-emitting diode.) Light strip refers to the assembly of LEDs on a strip-shaped FPC (flexible circuit board) or PCB hard board. At present, the commonly used types of LED light strips are 3528 and 5050 light strips (3528 refers to the size of the LED light source, 32mm long and 28mm wide, and 5050 refers to the length and width of the LED light source are 50mm). The difference between the two is that the size is different on the one hand, and the 5050 lamp bead on the other hand There are 3 LED chips inside, so under the same number of beads, the brightness of the 5050 LED strip is 3 times that of the 3528 LED strip. Constant current 2835led light belt is named after its product shape is like a belt. Because of the long service life (generally the normal life is 80 to 100,000 hours), green and environmental protection, it has gradually emerged in various decoration industries. The PCB board with a very soft thickness of 2MM is used as the substrate, and the constant current 2835led lamp with LED lamp strip is generally used. It is high voltage 220V, so it is wrapped with a thick layer of flame-retardant glue. Wires, circuit boards, etc. are generally made of copper. LED lamp beads determine the life of the light strip. For the sake of electricity safety, it must not be cheap because of the price. , If the quality is inferior, it may be a safety hazard in exchange. Easy to install and fix. Flexible and convenient cutting makes construction and operation convenient, ultra-thin design, low-temperature light source, so that the selection and matching of auxiliary materials during the product installation process is more flexible. The lighting factory is a high-tech LED lighting source enterprise integrating the research and development of LED lamp beads. It provides you with free lighting solutions for different venues and on-site guidance and testing. The constant current 2835led light strip will be packaged in an anti-static coil. , Usually a roll of 5 meters or a roll of 10 meters, and then use anti-static and moisture-proof packaging bags to seal the outside. The counterfeit version of the LED light belt will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look carefully at the reel, you can see that there are marks and scratches left by the removal of the label on the outside. Years of industry experience, the company's complete process system, quality control, standardized implementation process, strict control cycle, and timely delivery.