Jieyang adjustable temperature 3014LED lamp with cost

With the development of landscape lighting, LED strips have gradually emerged in the lighting industry because of their long service life and green environmental protection. It has become the new favorite of lighting engineering construction. Adjustable temperature of 3014 LED strips to see the cleanliness of the surface of the LED strips. If the LED strips produced by the SMT process are clean, the surface is very clean, and no impurities and stains can be seen. However, if the counterfeit LED strip is produced by hand soldering process, no matter how it is cleaned, there will be stains and cleaning marks on the surface, and there will be flux and tin residue on the surface of the FPC. Then, in the process of actual installation and use, sometimes the LED lamp belt is falsely broken, that is, the LED lamp belt is often said to be off. High-brightness, high-quality imported lamp beads, high-end customized detailed product prices, adjustable temperature 3014 LED lamp with LED lights with round two-wire, round three-wire, flat three-wire, flat four-wire, etc. Usually the second-line lamp is round , Three-wire and four-wire are all flat, round ones are suitable for outdoor occasions, while flat ones are mostly used in outdoor places. Attention should be paid to choosing suitable LED lights with card slots during interior decoration to decorate a more beautiful space. There are also many types of colors, including cool white, warm white, yellow, etc. Different colors of lights bring different feelings and warmth. There are warm colors, cold colors and so on. For product introduction information such as product pictures, you can directly contact the manufacturer to obtain LED strips. Samsung 2835 strips. High-brightness, high-quality imported lamp beads. High-end customized specific information. The lighting factory uses a dedicated continuous patch process to replace the PCB patch process to achieve efficient and automated production. British innovative research and development of high heat dissipation circuit board, adjustable temperature 3014 LED lamp with LED2835 0.2w sticker lamp with board, when the whole board is tested, there are a few lessons that do not light up, there are two possibilities for a single test to light up. There is an open circuit in the connection line of the local lamp beads; the second is that the lamp beads themselves are faulty, and a single lamp can be lit with a low current test, which does not mean that the entire board is working normally. Inspection method: Firstly, check whether the circuit between the lamp beads on the lamp board has an open-circuit and virtual soldering state, and then replace the lamp board to test whether the lamp bead of the lamp board is faulty. The luminous flux of its leadless LED light strip is increased by more than 100% compared with the traditional light strip, and the energy-saving effect is increased by 100%-200%, so that the LED light strip can truly achieve energy saving and high brightness, and become an ultra-high brightness lighting level light strip.