Jiangmen Waterproof High Voltage 2835LED Strip Manufacturer

The color temperature of LED strips is very large nowadays. The color temperature is a professional concept. The LED strips produced by the regular LED strip manufacturers of waterproof and high-pressure 2835 LED strips are produced by SMT patch technology, solder paste and reflow soldering process. Therefore, the solder joints on the LED light strip are relatively smooth and the amount of solder is not too much. The solder joints extend from the FPC pad to the LED electrode in a circular arc shape. However, the amount of solder in the solder joints of the counterfeit version of the LED light strip is uneven, and most of the solder feet are covered by a dot, and at the same time there will be different degrees of tin tips, which is a typical phenomenon of manual soldering. Simply put, it is the color of light. In terms of white light, the color temperature is generally expressed in thousands of digits. The smaller the number, the yellower and redder the color, the larger the number, the whiter, and the more blue. The unit is expressed by K. With good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, and the light is uniform, and the brightness of the lamp strip should be consistent at the beginning and the end. When choosing the color of the waterproof high-pressure 2835LED light strip, we can choose the right color according to our own preferences and decoration style. The ceiling generally chooses white, yellow, and light colors. According to the usage of the room, the living room usually chooses warm yellow and blue light strips, because warm yellow light gives people a warm and comfortable feeling, especially in cold winter. Feel. Blue gives people a higher and more profound feeling. The light color of the light strip should also be consistent. If you want the light to have a uniform luminous effect, you must choose a good color rendering index when purchasing. The color rendering index Ra> 80 is a requirement that a professional LED light strip must meet. This is also a requirement of the national standard GB50034-2013. LED strips are generally 220V, so they are wrapped with a thick layer of flame-retardant glue. Wires and circuit boards are generally made of copper. LED lamp beads determine the life of the strip. Waterproof high-pressure 2835 LED strips LED strips per meter The number of lamp beads is fixed. 1210 is 60 lights, 5050 is 30 lights. If there are special requirements, if there are 50 lights per meter, it is necessary to modify the circuit. Usually it is a group of 3 LEDs. If it is 50 lamps, there will be a group of insufficient quantity, but if it becomes a group of two LEDs, the resistance of the current-limiting resistor will be increased, which will cause a waste of resources. Therefore, when customizing LED light strips, you must pay attention to the number of lamp beads that is a multiple of 3. For the sake of electricity safety, you must not choose inferior quality. If you are greedy for a moment, it may be a safety hazard!