Jiangmen led lights with consultation telephone

The LED light strips are generally designed in the grooves on the top, wall, or ground. The light is always blocked and projected and reflected to see good results. LED strips LED strips were born in recent years with the development of LED technology. When there is no LED strips, T4 and T5 tubes are used for backlighting, but the minimum size of T4 and T5 tubes is 0.3 Meters, this means that if there is less than 0.3 meters, there will be a dark area, and the LED strips emit light evenly and can be cut according to the actual length, which is very convenient. Therefore, the effect of LED light source is generally very soft and romantic, and it can have a variety of colors. In addition to enriching the space and lighting, it also has the function of dividing space and highlighting key decorations. LED light strips need to be driven by a power supply to emit light. LED light strips have nothing to do with 2538 or 5730. The so-called 2538 5630 refers to the packaging specifications of LED chips. When LED is used for grass cultivation, the spectrum and luminous flux are the most concerned. Plant growth requires red and blue spectra. Among them, red at 660nm and blue at 540-550 are the most important. As for the luminous flux, it depends on the species of water plants in the grass tank. When the voltage drop of the LED driving power supply is relatively large, connect an excessively long LED light. With the phenomenon that the brightness of the head and tail will not be consistent. Quick judgment method: connect the required length, light up the light strip, and compare them side by side, observe with eyes. The bull LED light strip adopts dome refraction technology to provide uniform light and avoid dark areas. To do a good job of LED light strips need to include various factors such as craftsmanship, technology, and service. As far as lighting quality is concerned, LED floodlights do not have heat, ultraviolet or infrared radiation, and will not cause harm to exhibits or commodities. Compared with traditional light sources, lamps do not require additional filter equipment, and the lighting system is simple and low in cost. Price and easy equipment. Its precise lighting can be used as a substitute for optical fiber lighting in museums. Many companies will choose to abandon the production of this product for short-term profit considerations. The lighting factory is not afraid of hardships and marches forward courageously on the LED light belt.