Jiangmen led light strip manufacturers

When it comes to LED light strips, some owners may be very unfamiliar. Although some owners know but only know LED lights, they may not be familiar with other specific conditions. LED strips currently commonly used LED strips are 3528 and 5050 strips (3528 refers to the size of the LED light source, 32mm long and 28mm wide, 5050 refers to the length and width of the LED light source are 50mm), the difference between the two is one On the one hand, the size is different. On the other hand, there are 3 LED chips in the 5050 lamp beads, so under the same number of lamp beads, the brightness of the 5050 LED lamp strip is 3 times that of the 3528 LED strip. Today, I will borrow the information of the Shenzhen Lighting Factory Decoration Company to introduce one of the knowledge of LED light strips-the classification of LED light strips. Let's take a closer look at it below! With good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, and the light is uniform, and the brightness of the lamp strip should be consistent at the beginning and the end. LED lights with LED lights: 1, low energy consumption, energy saving: power consumption is only 1/10 of the ordinary rice bulb. The power per meter is 3 watts; 2. High safety: high electro-optical conversion rate, close to 100%, low heat generation, no fire hazard; 3. Long life: under normal working conditions, the life span can reach 80,000 hours, up to 5 Years; 4. Strong plasticity: easy to bend and design a variety of shapes to achieve a variety of decorative effects; waterproof, can be used outdoors and indoors; collision-resistant, maintenance-free lamps. The light color of the light strip should also be consistent. If you want the light to have a uniform luminous effect, you must choose a good color rendering index when purchasing. The color rendering index Ra> 80 is a requirement that a professional LED light strip must meet. This is also a requirement of the national standard GB50034-2013. If you want to do a good job of LED light strips, you need to include various factors such as process, technology, and service. Install the led strip light strip first cut according to the required length and take out the right amount of light strip, then directly insert the side of the light strip without the patch position against the thread pin, when the thread pin is connected to the plug, the plug can be plugged in. Powered up and used. In this process, it should be noted that the access point must be checked repeatedly to avoid leakage of water. Many companies will choose to abandon the production of this product for short-term profit considerations. The lighting factory is not afraid of hardships and marches forward bravely on the LED light belt.