Jiangmen Highlights 2835 LED Strip Cost

The reason why LED lighting is popular is not only because it saves electricity, but also because it can produce beautiful effects in every residence. It is difficult not to use LED in modern design. Highlight the 2835LED strip to see the quality of FPC. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off, and if the temperature is too high during maintenance, the pad will fall off. Today, Shenzhen Lighting Factory gives you some suggestions and examples about LED strips. Take a look at the suggestions below to get some new ideas for your own decoration design. The LED strip needs to be driven by a power supply to emit light. The SMD5050 used in the high-brightness 2835 LED strip is packaged with Taiwan's high-brightness chip, and the luminous flux is 1-2lm higher than that of the ordinary chip. A 5050 lamp bead has three chips. When one chip is damaged, it will not affect the other two chips to emit light. When only three cores are damaged, only a group of three 5050s will not light up, which will not affect the entire light strip. When the voltage drop of the LED drive power supply is relatively large, the brightness of the LED strips that are connected for too long will be inconsistent at the beginning and the end. Quick judgment method: connect the required length, light up the light strip, and compare them side by side, observe with eyes. The bull LED light strip adopts dome refraction technology to provide uniform light and avoid dark areas. Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether it will accumulate dust and whether it needs to have a sheath. The highlight 2835 LED light strip LED light strip was born with the development of LED technology in recent years. When there is no LED light strip, it is T4 and T5 lamps are used for backlighting, but the minimum size of T4 and T5 lamps is 0.3 meters, which means that if there is less than 0.3 meters, there will be a dark area, while the LED strips will emit light evenly and can be based on actual conditions. It is very convenient to cut the length. Don't just see the advantages of the protective sleeve, its disadvantage is that it may lose a little light. Therefore, it is necessary to understand the product, understand the application place, understand the demand, and choose the right product.