Jiangmen 5630led light strip manufacturer

When decorating, you usually see LED strips in the decoration list, but most owners don’t know what it is. LED strips are usually high-voltage 220V, so a thick layer of flame retardant glue is used. For packaging, wires, circuit boards, etc. are generally made of copper. LED lamp beads determine the life of the light strip. For the sake of electricity safety, you must not choose inferior quality because of the low price. If you are greedy for temporary cheapness, you may get it. It is a safety hazard! Of course, it is not ruled out that you can find good quality and cheap prices, but such an opportunity does not fall out of thin air. In fact, this is normal for the 5630led light strip. One is that there is not much contact, and the other is that the light strip is hidden. We only see its light but not its figure. First of all, we must know that the light strip can only play a decorative role. The 5630led light strip LED light strip was born with the development of LED technology in recent years. When there is no LED light strip, T4 and T5 tubes are used. Used for backlighting, but the minimum size of T4 and T5 tubes is 0.3 meters, which means that if there are less than 0.3 meters, there will be a dark area. The LED strips emit light evenly and can be cut according to the actual length, which is very convenient . For the color, you can choose warm white or RGB multi-color, RGBWC5 color, because the main function of the light strip is to embellish, so it is recommended to use warm white, so that the effect of the living room and dining room will be more warm, and it will be aesthetically fatigued after a long time. . In festivals, PARTY and other scenes, consider using RGBWC to meet the needs of all seasons. Only by using LED downlights and other lamps to create a moderate and comfortable lighting environment can we inspire the spirit of a family! For a comfortable light environment experience, when 5630led light strips are used for indoor decoration, the back of each LED light strip is covered with self-adhesive 3M double-sided tape, and the sticker on the surface of the 3M double-sided tape can be removed directly during installation. Then fix the light bar to the place where it needs to be installed and press it flat by hand. As for some places that require corners or are long, what should I do? Very simple, the LED light strip is a circuit structure composed of 3 LEDs in series and parallel, and each 3 LEDs can be cut and used individually. It has never been possible without the outline of these auxiliary light sources with LED lights. The above is the complete guide for the use and installation of LED light strips taught by Shenzhen Lighting Factory Company. Thank you for taking it away!