Jiangmen 2835led light strip processing

The LED light strips are generally designed in the grooves on the top, wall, or ground. The light is always blocked and projected and reflected to see good results. The 2835led light strip is used as a supplementary light for lighting. The color of the light strip and the main indoor light source cooperate with each other to make the home brighter. As long as you choose the right color of the light strip, the feeling at home must be more warm. But when choosing a light strip, we must reduce light pollution, and try to choose a cold light source light strip with less pollution. Avoid choosing high-temperature light sources such as spotlights, because high-temperature light sources will heat up after a while, absorb dust, and even cause the surrounding area of u200bu200bthe light strip to become black, which is ugly and difficult to clean. Therefore, the effect of the LED light source is generally very soft and romantic, and it can have a variety of colors. In addition to enriching the space and lighting, it also has the function of dividing space and highlighting key decorations. General light strip products provide 3000K and 4000K color temperature for selection. 2835led light strip flexible LED light strip uses FPC as assembly circuit board, and is assembled with SMD LEDs, and the thickness is only the thickness of a coin; the general specifications are 30cm long 18 LEDs, 24 LEDs and 50cm long 15 LEDs . There are also 60cm, 80cm, etc., which can be cut at will or extended at will without affecting the light emission. It can be bent, folded, and wound arbitrarily, and it is suitable for use in irregular places and places with small spaces. Bull LED strip products have 3 color temperatures to choose from, 3000K, 4000K and 5700K. Hotels, high-end shopping malls and home furnishings can choose a low color temperature below 3000K to create a warm atmosphere; the office can choose a cold light source with a higher color temperature. In today's LED lighting industry, market demands are becoming more and more diversified, and competition among enterprises has become increasingly fierce. The search for survival has become a top priority for enterprises. 2835led light strip LED2835 0.2w attached light strip board, when the whole board is tested, it does not light up for a few lessons. There are two possibilities for a single test to light up. The first is that the local lamp bead connection line on the light board is open; The lamp bead itself is faulty, and a single lamp can be lit with a low current test, which does not mean that the whole board works normally. Inspection method: Firstly, check whether the circuit between the lamp beads on the lamp board is open-circuited and soldered, and then replace the lamp board to test whether the lamp bead of the lamp board itself is faulty. Due to the long-term oversupply, consumers are no longer 'passive' in their choices, but are very keen on customized products. This is what we strive for, born for consumers.