Jiangmen 2835led light belt consultation

LED light strips are a major artifact of indirect lighting, which are very common in hotels, high-end shopping malls and home lighting applications. Seeing the light but not the light is our most vivid understanding of LED strips. 2835led light strip depends on the quality of FPC. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off. If the temperature is too high during maintenance, the pad will fall off. Because the light strip is installed in a hidden way, the light source is not exposed, which can effectively reduce the discomfort caused by glare. . Therefore, LED light strips are widely used in various commercial spaces and home lighting. With good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, and the light is uniform, and the brightness of the lamp strip should be consistent at the beginning and the end. 2835led strips currently commonly used LED strips are 3528 and 5050 strips (3528 refers to the size of the LED light source, 32mm in length and 28mm in width, 5050 refers to the length and width of the LED light source is 50mm), the difference between the two is one On the one hand, the size is different. On the other hand, there are 3 LED chips in the 5050 lamp beads, so under the same number of lamp beads, the brightness of the 5050 LED lamp strip is 3 times that of the 3528 LED strip. The light color of the light strip should also be consistent. If you want the light to have a uniform luminous effect, you must choose a good color rendering index when purchasing. The color rendering index Ra> 80 is a requirement that a professional LED light strip must meet. This is also a requirement of the national standard GB50034-2013. Try the new favorite of home improvement-LED light strips, 2835led light strips. When LED light strips are used for interior decoration, the back of each LED light strip is covered with self-adhesive 3M double-sided tape. The surface of the 3M double-sided tape can be removed directly when installing Then fix the light bar to the place where it needs to be installed, and press it flat by hand. As for some places that require corners or are long, what should I do? Very simple, the LED light strip is a circuit structure composed of 3 LEDs in series and parallel, and each 3 LEDs can be cut and used individually. Installation is flexible and changeable. How to choose high-quality LED light strips is here-the lighting factory.