Huizhou Samsung 2835 LED strip factory

In fact, people without relevant knowledge and experience are easily deceived and buy low-quality light strips. However, experienced people still have a way to identify, the LED light strips produced by regular manufacturers and the LED light strips of cottages can be seen at a glance from the appearance. The power of Samsung 2835LED light strip 2835led light strip is about 15W. The LED light strip uses FPC as assembly circuit board and SMD LED assembly, so that the thickness of the product is only the thickness of a coin. The general specification is 30cm long and 18 LEDs. 24 LEDs and 50cm long 15 LEDs, 24 LEDs, 30 LEDs, etc. There are also 60cm, 80cm, etc. It can be cut and extended arbitrarily without affecting the light emission. The following Shenzhen Lighting Factory introduced us to the identification techniques of the quality of LED light strips, to see how to identify the quality of LED light strips by eyes. When it comes to LEDs, energy saving is naturally its due. The Samsung 2835 LED light strip is used as a supplementary light for lighting. The color of the light strip matches the main indoor light source to make the home brighter. As long as you choose the right color of the light strip, the feeling at home must be more warm. But when choosing a light strip, we must reduce light pollution, and try to choose a cold light source light strip with less pollution. Avoid choosing high-temperature light sources such as spotlights, because high-temperature light sources will heat up after a while, attract dust, and even cause the surrounding area of u200bu200bthe light strip to become black, which is ugly and difficult to clean. For LED light strips, the importance of light efficiency has a lot to do with its application scenarios. The requirements for light efficiency are relatively low when applied to large-area luminous ceilings or showcases. As a professional LED strip, under the premise of color rendering index Ra> 80, the light efficiency should be at least 60 lm/W. LED light strips are generally 220V, so they are wrapped with a thick layer of flame retardant glue. Wires and circuit boards are generally made of copper. LED lamp beads determine the life of the light strip. Samsung 2835 LED light strips use SMD5050 , It is packaged with Taiwan's high-brightness chip, the luminous flux is 1-2lm higher than ordinary chips. A 5050 lamp bead has three chips. When one chip is damaged, it will not affect the other two chips to emit light. When only three cores are damaged, only a group of three 5050s will not light, which will not affect the entire light strip. For the sake of electricity safety, you must not use inferior quality products. If you are greedy for a while, you may get a safety hazard!