Huizhou adjustable temperature 3014LED strip manufacturer

The reason why LED lighting is popular is not only because it saves electricity, but also because it can produce beautiful effects in every residence. It is difficult not to use LED in modern design. The SMD5050 used in the 3014 LED lamp with adjustable color temperature is packaged with Taiwan's high-brightness chip, and the luminous flux is 1-2lm higher than that of the ordinary chip. A 5050 lamp bead has three chips. When one chip is damaged, it will not affect the other two chips to emit light. When only three cores are damaged, only a group of three 5050s will not light up, which will not affect the entire light strip. Today, Shenzhen Lighting Factory gives you some suggestions and examples about LED strips. Take a look at the suggestions below to get some new ideas for your own decoration design. The LED light strip needs to be driven by a power supply to emit light. The models used for the 3014 LED light strip with adjustable color temperature are 3528 and 5050. Therefore, whether you can buy a good chip, in addition to whether you can pay a good price when you buy it yourself, you also need the manufacturer's integrity. Generally speaking, European, American and Japanese chips are better than Taiwanese chips, and Taiwanese chips are better than domestic ones. But the price is also higher than one. Sometimes I am really 'proud': There is really no shortage of cutting-edge talents in China. When the voltage drop of the LED drive power supply is relatively large, the brightness of the LED strips that are connected for too long will be inconsistent at the beginning and the end. Quick judgment method: connect the required length, light up the light strip, and compare them side by side, observe with eyes. The bull LED light strip adopts dome refraction technology to provide uniform light and avoid dark areas. Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether it will accumulate dust, whether it is necessary to have a sheath, and the color temperature is 3014LED lamp with LED2835 0.2w sticker lamp with board, when the whole board is tested, there are a few lessons that do not light up, and there are two light on a single test. There are several possibilities. The first is that the local lamp bead connection circuit on the lamp board is open; the second is that the lamp bead itself is faulty. A single lamp can be lit with a low current test, which does not mean that the entire board is working normally. Inspection method: Firstly, check whether the circuit between the lamp beads on the lamp board has an open-circuit and virtual soldering state, and then replace the lamp board to test whether the lamp bead of the lamp board is faulty. Don't just see the advantages of the protective sleeve, its disadvantage is that it may lose a little light. Therefore, it is necessary to understand the product, understand the application place, understand the demand, and choose the right product.