Huizhou 5630led light strip supplier

The light strip is generally installed in a dark groove, showing 'seeing the light but not the light'! Can make the space highlight the sense of hierarchy and increase the artistic conception! The color rendering problem of 5630led light strip LED light strip is not very important when the product is applied to indirect lighting lamp trough, but when it is applied to large-area luminous ceiling as basic lighting or used in showcase as display lighting At that time, the color rendering index Ra>80 is a requirement that a professional LED strip must meet. This is also a requirement of the national standard GB50034-2013. The true appearance of the light strip is like a belt. It uses an LED light source. As the name suggests, it is called an LED light strip. It can be turned on by directly connecting to the 220V mains. It is fixed with a fixed card and it is not difficult to install. 5630LED lamp with double row highlighting 180 beads, ceiling outdoor waterproof lamp for living room ceiling. 5630led lights with led lights with round two-wire, round three-wire, flat three-wire, flat four-wire, etc. Usually the second-line light strip is round, three-wire and four-wire are flat, round ones are suitable for outdoor occasions, and flat ones are mostly used outdoors place. Attention should be paid to choosing suitable LED lights with card slots during interior decoration to decorate a more beautiful space. There are also many types of colors, including cool white, warm white, yellow, etc. Different colors of lights bring different feelings and warmth. There are warm colors, cold colors and so on. The new 5630 light strip, imported Korean Samsung light source, suitable for high-end clubs, villas, luxury home decoration, outdoor lighting, pure copper wire. The lighting factory uses a dedicated continuous patch process to replace the PCB patch process to achieve efficient and automated production. Britain has innovatively developed high heat dissipation circuit boards, 5630led lights with led lights are installed, generally fixed with 3M glue. Installed outdoors, often in wind and rain, over time will reduce the adhesiveness and cause the LED light strip to fall off. Therefore, the outdoor installation usually adopts the method of fixing with the card slot, and the place that needs to be cut and connected is the same as the indoor installation. , Just need to be equipped with waterproof glue to consolidate the waterproof effect of the connection point. Then use a special fixing clip to fix it, you can use an electric hammer to drill the eye, use a plastic expansion tube and screw to fix the clip
The luminous flux of its leadless LED light strip is increased by more than 100% compared with the traditional light strip, and the energy-saving effect is increased by 100%-200%, so that the LED light strip can truly achieve energy saving and high brightness, and become an ultra-high-brightness lighting-level light strip.