How to Install a Pendant Light Into an Existing Track Light Fixture

by:EME LIGHTING     2019-12-31
The chandelier adds beauty and efficiency to the rail lighting system.The light hangs from the track and projects more light directly to a specific area.Chandeliers are most useful in areas like kitchen where you want to get more light on the surface of the counterNot scattered in the room.Still maintain a complex look.Installing the new chandelier into the existing rail lighting system is almost free and can be done in just a few minutes.Test the power of the track system by turning on the light.Turn off the lights.Turn off the power of the track light at the circuit breaker.Verify that the new chandelier does not overload the maximum wattage rating of the rail light system.If necessary, remove one or more existing lights to allow the wattage of the chandelier.At the mounting point, the contact blades on the chandelier rod are aligned parallel to the track.Turn the 90 degree Chandelier Bar clockwise.The stem will lock in place.Install the sun visor on the rod.Depending on the model you purchased, the shadow will be screwed in place without hardware, or you will need to insert the screw into the rod and tighten it to keep it.If you need to insert the screws, there will be pre-cut holes on the stem, and they will be included in the hardware kit that comes with the pendant light.Insert the bulb into the chandelier that meets the lamp power specifications.Turn on the power to the rail light system and test it to make sure all lights work properly.Adjust the light to achieve the desired lighting effect.Once the settings are correct, tighten the position adjustment screws so that the lights do not move.Over time, the weight of vibration and light can move it away from position.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...