Hotel engineering quality assurance from the lamp ACTS the role of material selection of lamps and lanterns

Flexibility star hotel commonly use illuminant, life around 2000 ~ 4000 hours before. So the lamps will be asked to change many times over a decade of light source. All over thousands of the number of lamps and lanterns of star hotel, it change the light source is also involved in a huge human resources, so the flexibility of lamps and lanterns is another important consideration. And the ideal selection of lamps and lanterns is without affecting the fixed of lamps and lanterns, Positioning) Components, can will light loading and unloading. Besides this could save the time of change, also the protection of interior decoration to make a very positive. Detail model that includes all aspects of the hotel project itself of lamps and lanterns. With average day cylinder lamps as example, its coating quality of the cup ( If metal, surface quality) , smooth degree of reflective cup ( So frosted reflective cup, sandblast evenness) Smallpox, when lamps and lanterns is installed in the ceiling, and surface ( Gypsum board/wood veneer) The joint tightness ( Have you light-leaking) Such details must be noticed. And in addition to lamps and lanterns, installation workers ( Process) Also vital, decorate aspects to take to ensure that the lamps and lanterns is installed in the right way. Cast light index of the glare of lamps and lanterns, light source, how to collect, lamps and lanterns is the elasticity of the projection direction, fitting degree of expansion, is affecting the selection of lamps and lanterns. Especially in terms of parts of scalability, considered to be very thorough, because the control index of the cast light on the 'cast light Angle', 'color/color calibration', 'glare prevention', '/ accurate projection lighting' most is to rely on these parts to build the overall atmosphere. General star hotel with light source, life around 2000 ~ 4000 hours before. So the lamps will be asked to change many times over a decade of light source. All over thousands of the number of lamps and lanterns of star hotel, it change the light source is also involved in a huge human resources, so the flexibility of lamps and lanterns is another important consideration. And the ideal selection of lamps and lanterns is without affecting the fixed of lamps and lanterns, Positioning) Components, can will light loading and unloading. Besides this could save the time of change, also the protection of interior decoration to make a very positive. Hotel engineering quality assurance from the lamp ACTS the role of material selection of lamps and lanterns, such as the popular used lamps and lanterns of LED chips, more than any other material under normal use for longer service life of lamps and lanterns, but at room temperature is 45 degrees, the chip temperature over 65 degrees, the service life will be greatly reduced. So when lamps and lanterns of custom must be on the material request. Disadvantages if using inferior material, in a short period of time may be not so obvious, use for a long time will produce the phenomenon such as fading, polarization, directly affects the service life of lamps and lanterns, shortens the cycle of replacement lamps.