Heyuan Waterproof High Voltage 2835LED Light Strip Cost

During the decoration process, the lamp strip selection skills and the decoration effect are reflected. Introduction The lamp strip refers to the LED lamp is welded on the copper wire or strip-shaped flexible circuit board with a special processing technology, and then connected to the power supply to emit light. Named from the light belt. Waterproof and high-pressure 2835LED light strips The regular LED light strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static moisture-proof packaging bags on the outside. The counterfeit version of the LED light belt will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look carefully at the reel, you can see that there are marks and scratches left by the removal of the label on the outside. During the decoration process, the lamp belt selection skills and decoration effect are introduced. General light strip products provide 3000K and 4000K color temperature for selection. Waterproof high voltage 2835LED light strip depends on the quality of FPC. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off. If the temperature is too high during maintenance, it will also cause the pad to fall off. Bull LED strip products are available in 3 color temperatures, 3000K, 4000K and 5700K. Hotels, high-end shopping malls and home furnishings can choose a low color temperature below 3000K to create a warm atmosphere; the office can choose a cold light source with a higher color temperature. Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether it will accumulate dust and whether there is a sheath or not. There are two types of waterproof and high-pressure 2835LED lights with LED lights. There are two types, one is hard and hard light, and the other is soft light . LED rigid light strips are assembled with PCB rigid boards. LEDs can be assembled with SMD LEDs or in-line LEDs. Different components are used according to different needs. Don't just see the advantages of the protective sleeve, its disadvantage is that it may lose a little light. So we must understand the product, understand the application place, understand the demand, and choose the right product.