Heyuan Samsung 2835LED lights with customization

With the development of the LED industry, the functions of LED soft lights with environmental protection, small size, and high reliability have gradually become prominent from other aspects. When the Samsung 2835 LED strip is used for interior decoration, the back of each LED strip has a self-adhesive 3M double-sided tape. When installing, you can directly remove the sticker on the surface of the 3M double-sided tape, and then fix the strip on the The place that needs to be installed is just flat by hand. As for some places that require corners or are long, what should I do? Very simple, the LED light strip is a circuit structure composed of 3 LEDs in series and parallel, and each 3 LEDs can be cut and used individually. In places where electricity costs are high and use time is long, sensitive LED soft light belts have become the new favorite of shopping malls. The LED light strip needs to be driven by a power supply to emit light. The Samsung 2835 LED light strip will be packaged in an anti-static reel, usually 5 meters per roll or 10 meters per roll, and then sealed with an anti-static moisture-proof packaging bag on the outside. . The counterfeit version of the LED light belt will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look carefully at the reel, you can see that there are marks and scratches left by the removal of the label on the outside. When the voltage drop of the LED drive power is relatively large, the brightness of the LED strips that are connected for too long will be inconsistent at the beginning and the end. Quick judgment method: connect the required length, light up the light strips, and compare them side by side, observe with your eyes. The bull LED light strip adopts dome refraction technology to provide uniform light and avoid dark areas. To do a good job of LED light strips need to include various factors such as craftsmanship, technology, and service. Samsung 2835 LED light strip LED light strip is generally 100 meters in a roll. When purchasing, you should tell the seller in advance according to the length you need and how much you order. Generally, we will cut it out for you. You need to use several sections at home, each section is equipped with a connector, just plug it directly into the socket. If you want to cut it yourself, you need to pay attention. The light strip will usually be marked with a special scissors mouth, cut it at the scissors mouth, connect it, and you can use it. Remember: be sure to cut according to the instructions, otherwise it will cause no light! Many companies will choose to abandon the production of this product for short-term profit considerations. The lighting factory is not afraid of hardships and marches forward courageously on the LED light belt.