Heyuan No Dark Zone 3014LED Strip Manufacturer

During the decoration process, the lamp strip selection skills and the decoration effect are reflected. Introduction The lamp strip refers to the LED lamp is welded on the copper wire or strip-shaped flexible circuit board with a special processing technology, and then connected to the power supply to emit light, because its shape is like a strip when it emits light Named from the light belt. No dark zone 3014LED light strip 2835led light strip power is about 15W, LED light strip is assembled with FPC circuit board, assembled with SMD LED, so that the thickness of the product is only the thickness of a coin. The general specification is 30cm long and 18 pcs. LED, 24 LEDs and 50cm long 15 LEDs, 24 LEDs, 30 LEDs, etc. There are also 60cm, 80cm, etc. It can be cut and extended arbitrarily without affecting the luminescence. During the decoration process, the lamp belt selection skills and the decoration effect are introduced. First of all, we must know that the light strip can only play a decorative role. The SMD5050 used in the 3014LED light strip without dark area is packaged with Taiwan's high-brightness chip, and the luminous flux is 1-2lm higher than the ordinary chip. A 5050 lamp bead has three chips. When one chip is damaged, it will not affect the other two chips to emit light. When only three cores are damaged, only a group of three 5050s will not light up, which will not affect the entire light strip. For the color, you can choose warm white or RGB multi-color, RGBWC5 color, because the main function of the light strip is to embellish, so it is recommended to use warm white, so that the effect of the living room and dining room will be more warm, and it will be aesthetically fatigued after a long time. . In festivals, PARTY and other scenes, consider using RGBWC to meet the needs of all seasons. Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether it will accumulate dust, whether there is a sheath, and the quality of the FPC is determined by the 3014LED strip without dark area. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off. If the temperature is too high during maintenance, the pad will fall off. Don’t just see the advantages of the protective cover. Its disadvantage is that it may lose a little light. Therefore, it is necessary to understand the product, understand the application place, understand the demand, and choose the right product.