Heyuan LED light strip design

When choosing LED light strips, many people are concerned about whether it matches the home style and the price and quality. When LED light strips are used for interior decoration, self-adhesive 3M double-sided tape is attached to the back of each LED light strip. , When installing, you can directly tear off the sticker on the surface of the 3M double-sided adhesive, and then fix the light bar to the place where it needs to be installed, and just press it flat by hand. As for some places that require corners or are long, what should I do? Very simple, the LED light strip is a circuit structure composed of 3 LEDs in series and parallel, and each 3 LEDs can be cut and used individually. . What should you pay attention to when buying led strips? Shenzhen Lighting Factory will let you know about it. The ED lamp belt is mainly installed in the lamp trough to create a large area of u200bu200bluminous ceilings and walls. The number of lamp beads per meter of the LED lamp belt is fixed. 1210 is 60 lights, 5050 is 30 lights. If there are special requirements, if 50 lights per meter, it is necessary to modify the circuit. Usually it is a group of 3 LEDs. If it is 50 lamps, there will be a group of insufficient quantity, but if it becomes a group of two LEDs, the resistance of the current-limiting resistor will be increased, which will cause a waste of resources. Therefore, when customizing LED light strips, be sure to pay attention to the number of lamp beads being a multiple of 3 to shape the effect of wall washing. It is because of its large lighting range, so once a problem occurs, it will affect a wide range of light and shadow effects. When choosing LED strips, we must keep our eyes open and choose carefully. In today's LED lighting industry, market demands are becoming more and more diversified, and competition among companies is becoming more and more fierce. Seeking survival has become a top priority for companies. LED light strips LED light strips are generally high-voltage 220V, so they are wrapped with a thick layer of flame-retardant glue. Wires and circuit boards are generally made of copper. LED lamp beads determine the life of the light strip. For electrical safety, you must not choose inferior quality products just because the price is cheap. If you are greedy for temporary cheapness, you may get a safety hazard! Of course, it is not ruled out that you can find good quality and cheap prices, but such an opportunity does not fall out of thin air. Due to the long-term oversupply, consumers are no longer 'passive' in their choices, but are very keen on customized products. This is what we strive for, born for consumers.