Heyuan flexible 5630led light strip offer

Although the LED strip is good, there are always times when the light output is not satisfactory. Flexible 5630led light strips have accessories. The accessories generally include plugs (power supply), pins (for connection), fixing cards (plastic clips for fixing the light strips) and tail plugs (plastic sleeves to protect the tail of the light strips). ), these accessories are generally delivered by merchants, but you need to negotiate with the merchant first, and don't miss it. To solve the problem of poor lighting effect, start from the source, that is, you must choose when you choose the light strip. The following small Shenzhen Lighting Factory shares a few simple tips for choosing light strips, let you become an expert in light strip selection immediately! With good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, and the light is uniform, and the brightness of the lamp strip should be consistent at the beginning and the end. Flexible 5630led light strip LED light strip features: 1, low energy consumption, energy saving: power consumption is only 1/10 of the ordinary rice bulb. The power per meter is 3 watts; 2. High safety: high electro-optical conversion rate, close to 100%, low heat generation, no fire hazard; 3. Long life: under normal working conditions, the life span can reach 80,000 hours, up to 5 Years; 4. Strong plasticity: easy to bend and design a variety of shapes to achieve a variety of decorative effects; waterproof, can be used outdoors and indoors; collision-resistant, maintenance-free lamps. The light color of the light strip should also be consistent. If you want the light to have a uniform luminous effect, you must choose a good color rendering index when purchasing. The color rendering index Ra> 80 is a requirement that a professional LED light strip must meet. This is also a requirement of the national standard GB50034-2013. Try the new favorite of home improvement-LED light strips, flexible 5630led light strips LED light strips are generally 100 meters in a roll. When purchasing, you should tell the seller in advance and usually cut it out for you according to the length you need and how much you order. You need to use several sections at home, each section is equipped with a connector, just plug it directly into the socket. If you want to cut it yourself, you need to pay attention. The light strip will usually be marked with a special scissors mouth, cut it at the scissors mouth, connect it, and you can use it. Remember: be sure to cut according to the instructions, otherwise it will cause no light! Installation is flexible and changeable. How to choose high-quality LED light strips is all here-the lighting factory.