Heyuan 2835led light strip factory

During the decoration process, the lamp strip selection skills and the decoration effect are reflected. Introduction The lamp strip refers to the LED lamp is welded on the copper wire or strip-shaped flexible circuit board with a special processing technology, and then connected to the power supply to emit light, because its shape is like a strip when it emits light Named from the light belt. 2835led light strips LED light strips are divided into two types, one is hard light strips, and the other is soft light strips made of flexible materials. LED rigid light strips are assembled with PCB rigid boards. LEDs can be assembled with SMD LEDs or in-line LEDs. Different components are used according to different needs. During the decoration process, the lamp belt selection skills and the decoration effect are introduced. With good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, and the light is uniform, and the brightness of the lamp strip should be consistent at the beginning and the end. 2835led light strip depends on the quality of FPC. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off. If the temperature is too high during maintenance, the pad will fall off. The light color of the light strip should also be consistent. If the lamp has a uniform luminous effect, it is necessary when purchasing Choose good color rendering, color rendering index Ra>80 is a requirement that a professional LED strip must meet. This is also a requirement of the national standard GB50034-2013. Therefore, lighting is not just a flick of a switch to turn on lamps, lighting can embed emotions, attitudes and vitality into any environment. Wrong lighting may destroy the aesthetics of the design and have a negative impact on the user. The 2835led light strip is installed with the light strip first to cut out the appropriate amount of light strips according to the required length, and then directly face the thread needle to the light without the patch position. With one side inserted, when the needle is connected to the plug, the plug can be energized for use. In this process, it should be noted that the access point must be checked repeatedly to avoid leakage of water. This has counterproductive consequences. Good lighting can make all the elements in the space coexist harmoniously, and the led strip is an important regulator.