Foshan Samsung 2835 LED strip production

The reason why LED lighting is popular is not only because it saves electricity, but also because it can produce beautiful effects in every residence. It is difficult not to use LED in modern design. Samsung 2835LED lights with FPC quality. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off, and if the temperature is too high during maintenance, the pad will fall off. Today, Shenzhen Lighting Factory gives you some suggestions and examples about LED strips. Take a look at the suggestions below to get some new ideas for your own decoration design. With good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, and the light is uniform, and the brightness of the lamp strip should be consistent at the beginning and the end. Samsung 2835LED lamp with led lamp with specifications and models. LED size model used: 2835 (2.8*3.5mm) 5050 (5.0*5.0mm); LED color: red, green, blue, yellow, white (warm white, cool white) ),Full Color. Number of LEDs per meter: 5, 10, 15, 20, 30, 40. . . Input voltage: The light color of the 12Vdc and 24Vdc light strips should also be the same. If you want the light to have a uniform luminous effect, you must choose good color rendering when purchasing. The color rendering index Ra>80 is a professional LED light strip. The requirements that must be met. This is also a requirement of the national standard GB50034-2013. LED strips are generally 220V, so they are wrapped with a thick layer of flame-retardant glue. Wires and circuit boards are generally made of copper. LED lamp beads determine the life of the strip. Samsung 2835 LED strips
Cut light strip
The LED light strip is a circuit structure composed of 3/6 LEDs in series and parallel, and every 3 LEDs can be cut and used individually.
The cutting method of the light strip is that the blank space of every 3 or 6 lights on the light strip is a cutting place. If you cut it in other places, it will damage the circuit of this section of the light strip and cause the light strip to be damaged. .
For the sake of safety in electricity use, you must not choose inferior quality products. If you are greedy for a while, you may get a safety hazard!