Foshan LED strip production

Although the LED strip is good, there are always times when the light output is not satisfactory. Look at the cleanliness of the surface of the LED strip. If the LED strip is produced by the SMT process, the cleanliness of the surface is very good, and no impurities and stains can be seen. However, if the counterfeit LED strip is produced by hand soldering process, no matter how it is cleaned, there will be stains and cleaning marks on the surface, and there will be flux and tin residue on the surface of the FPC. To solve the problem of poor light output, start from the source, that is, choose the light strip when you choose. The following small Shenzhen Lighting Factory shares a few simple tips for choosing light strips, let you become an expert in light strip selection immediately! LED light strips need to be driven by a power supply. Features of LED light strips: 1. Low energy consumption and energy saving: The power consumption is only 1/10 of that of ordinary rice bulbs. The power per meter is 3 watts; 2. High safety: high electro-optical conversion rate, close to 100%, low heat generation, no fire hazard; 3. Long life: under normal working conditions, the life span can reach 80,000 hours, up to 5 Years; 4. Strong plasticity: easy to bend and design a variety of shapes to achieve a variety of decorative effects; waterproof, outdoor and indoor can be used; collision resistance, maintenance-free lamps. When the voltage drop of the LED drive power is relatively large, the brightness of the LED strips that are connected for too long will be inconsistent at the beginning and the end. Quick judgment method: connect the required length, light up the light strips, and compare them side by side, observe with your eyes. The bull LED light strip adopts dome refraction technology to provide uniform light and avoid dark areas. Try the new favorite of home improvement-LED light strip, LED light strip LED light strip single lamp bead damage will only affect the single lamp bead is not bright, does not affect the lighting effect, it is more and more recognized by the majority of users. The earliest process is to weld the LED on the copper wire, and then cover the PVC tube or use the equipment to directly shape it. There are two types of round and flat. The title is distinguished by the number of copper wires and the shape of the light strip. Two wires It is called the second line, the circle is added with a circle in front, that is, the circle is two lines; the flat shape is added with the word flat in front, that is, the flat two lines. Installation is flexible and changeable. How to choose high-quality LED light strips is here-the lighting factory.