Foshan led light strip manufacturers

by:EME LIGHTING     2021-03-22
The LED light strips are generally designed in the grooves on the top, wall, or ground. The light is always blocked and projected and reflected to see good results. led light belt【Special attention】
  a. If it is not 220V light bar, please do not use AC220V to light the light bar directly;
  b. Do not reverse the positive and negative poles;
  c. Operators, please wear an electrostatic ring to work. Therefore, the effect of the LED light source is generally very soft and romantic, and it can have a variety of colors. In addition to enriching the space and lighting, it also has the function of dividing space and highlighting key decorations. When it comes to LEDs, energy saving is naturally its due. The led light strip LED2835 0.2w attached light strip board, when the whole board is tested, there are a few lessons that do not light up, there are two possibilities for a single test to light up, the first is that the local lamp bead connection line on the light board is open; the second is The lamp bead itself is faulty, and a single lamp can be lit with a low current test, which does not mean that the whole board is working normally. Inspection method: Firstly, check whether the circuit between the lamp beads on the lamp board is open-circuited and soldered, and then replace the lamp board to test whether the lamp bead of the lamp board itself is faulty. For LED light strips, the importance of light efficiency has a lot to do with its application scenarios. The requirements for light efficiency are relatively low when applied to large-area luminous ceilings or showcases. As a professional LED strip, under the premise of color rendering index Ra> 80, the light efficiency should be at least 60 lm/W. The 3014 LED strip with adjustable color temperature also ensures the color gradation from the bottom to the top of the ceiling. The LED strip has nothing to do with 2538 or 5730. The so-called 2538 5630 refers to the packaging specifications of the LED chip. Use LED When raising grass, the most concern is the spectrum and luminous flux. Plant growth requires red and blue spectra. Among them, red at 660nm and blue at 540-550 are the most important. As for the luminous flux, it depends on the species of aquatic plants in the grass tank. In addition, the double-sided light box lens that illuminates the ridgeline of the relief is added. 3535 LED light strip It can highlight the architectural details of the ceiling space, and the whole is natural and unique.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...