Foshan flexible 5630led light strip supply

With the development of landscape lighting, LED strips have gradually emerged in the lighting industry because of their long service life and green environmental protection. It has become the new favorite of lighting engineering construction. In terms of materials, flexible 5630led light strips can be divided into two types: hard rigid strips and soft light strips. The advantage of the rigid light strip is that it is easier to fix, and the processing and installation are very simple, but this kind of light strip cannot be bent at will. The soft light strip of flexible material has good flexibility and can be folded and bent at will, but the price is more expensive. Then, in the process of actual installation and use, sometimes the LED lamp belt is falsely broken, that is, the LED lamp belt is often said to be off. When it comes to LEDs, energy saving is naturally a matter of course. Flexible 5630led light strips The regular LED light strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static moisture-proof packaging bags on the outside. The counterfeit version of the LED light strip will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. A closer look at the reel shows that there are marks and scratches left by the removal of the label on the outside. For LED light strips, the importance of light efficiency has a lot to do with its application scenarios, and the requirements for light efficiency are relatively low when applied to large-area illuminated ceilings or showcases. As a professional LED strip, under the premise of color rendering index Ra> 80, the light efficiency should be at least 60 lm/W. The lighting factory uses a dedicated continuous patch process to replace the PCB patch process to achieve efficient and automated production. British innovative research and development of high heat dissipation circuit boards, flexible 5630led lights with LED lights when used for indoor decoration, each LED lights with self-adhesive 3M double-sided tape on the back, you can directly tear off the surface of the 3M double-sided tape when installing Sticker, then fix the light bar to the place where it needs to be installed, and just press it flat by hand. As for some places that need corners or are long, what should I do? Very simple, the LED light strip is a circuit structure composed of 3 LEDs in series and parallel, and each 3 LEDs can be cut and used individually. The luminous flux of its non-wire LED light strip is increased by more than 100% compared with the traditional light strip, and the energy-saving effect is increased by 100%-200%, so that the LED light strip can truly achieve energy saving and high brightness, and become an ultra-high-brightness lighting-level light strip.