Foshan 5630led light strip manufacturers

LED light strips are a major artifact of indirect lighting, which are very common in hotels, high-end shopping malls and home lighting applications. Seeing the light but not the light is our most vivid understanding of LED strips. 5630led strips LED strips were born in recent years with the development of LED technology. When there is no LED strips, T4 and T5 tubes are used for backlighting, but the minimum size of T4 and T5 tubes is 0.3 Meters, this means that if there is less than 0.3 meters, there will be a dark area, and the LED strips emit light evenly and can be cut according to the actual length, which is very convenient. Since the light strip is installed in a hidden way, the light source is not exposed, which can effectively reduce the discomfort caused by glare to the human eye. Therefore, LED light strips are widely used in various commercial spaces and home lighting. Using a very flexible PCB board with a thickness of 2MM as the substrate, the number of beads per meter of the 5630led strip LED strip is fixed. 1210 is 60 lights, 5050 is 30 lights. If there are special requirements, if 50 lights per meter, it is necessary to modify the circuit. Usually it is a group of 3 LEDs. If it is 50 lights, there will be a group of insufficient quantity, but if it becomes a group of two LEDs, the resistance of the current-limiting resistor will be increased, which will cause a waste of resources. Therefore, when customizing LED strips, be sure to note that the number of beads is a multiple of 3, which is easy to install and fix. Flexible and convenient cutting makes the construction and operation convenient. The ultra-thin design and low-temperature light source make the choice of auxiliary materials more flexible during the installation process. If you want to do a good job of LED light strips, you need to include various factors such as process, technology, and service. The color rendering problem of 5630led light strip LED light strip is not very important when the product is applied to indirect lighting lamp trough, but when it is applied to large-area luminous ceiling as basic lighting or used in showcase as display lighting At that time, the color rendering index Ra>80 is a requirement that a professional LED strip must meet. This is also a requirement of the national standard GB50034-2013. Many companies will choose to abandon the production of this product for short-term profit considerations. The lighting factory is not afraid of hardships and marches forward bravely on the LED light belt.