Foshan 5630led light strip manufacturers

The LED light strips are generally designed in the grooves on the top, wall, or ground. The light is always blocked and projected and reflected to see good results. 5630led light strips The regular LED light strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static and moisture-proof packaging bags on the outside. The counterfeit version of the LED light belt will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look carefully at the reel, you can see that there are marks and scratches left by the removal of the label on the outside. Therefore, the effect of LED light source is generally very soft and romantic, and it can have a variety of colors. In addition to enriching the space and lighting, it also has the function of dividing space and highlighting key decorations. When it comes to LEDs, energy saving is naturally its due. 5630led light strip LED rigid light bar is assembled with PCB (printed circuit board) hard board, LED can be assembled with SMD LED, and can also be assembled with in-line LED. Different components are used according to different needs. The advantage of the rigid light bar is that it is easier to fix, and it is more convenient to process and install; the disadvantage is that it cannot be bent at will and is not suitable for irregular places. For LED light strips, the importance of light efficiency has a lot to do with its application scenarios. The requirements for light efficiency are relatively low when applied to large-area luminous ceilings or showcases. As a professional LED strip, under the premise of color rendering index Ra> 80, the light efficiency should be at least 60 lm/W. The light strip is not only beautiful, but also can increase the auxiliary lighting of the space. The 5630led light strip can see the cleanliness of the surface of the LED light strip. If the LED light strip produced by the SMT process is used, the surface cleanliness is very good, and no impurities can be seen. And stains. However, if the counterfeit LED strip is produced by hand soldering process, no matter how it is cleaned, there will be stains and cleaning marks on the surface, and there will be flux and tin residue on the surface of the FPC. Make the space brighter and easier to highlight personality and style. Visually it is more spacious and brings an unparalleled and wonderful view to the interior.