Foshan 5630led light belt consultation

The LED light strips are generally designed in the grooves on the top, wall, or ground. The light is always blocked and projected and reflected to see good results. 5630led light strip light strip has accessories. The accessories generally include plug (power supply), pin (for connection), fixing card (plastic clip for fixing the light strip) and tail plug (plastic sleeve to protect the tail of the light strip) , These accessories are generally delivered by merchants, but you need to negotiate with the merchants first, and don’t miss out. Therefore, the effect of LED light source is generally very soft and romantic, and it can have a variety of colors. In addition to enriching the space and lighting, it also has the function of dividing space and highlighting key decorations. When it comes to LEDs, energy saving is naturally its due. Look at the packaging of 5630led lights. Regular LED light strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static and moisture-proof packaging bags on the outside. The counterfeit version of the LED light strip will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look closely at the reel, you can see that there are marks and scratches left by the removal of the label on the surface. In terms of bands, the importance of light effects has a lot to do with its application scenarios, and the requirements for light effects are relatively low when applied to large-area luminous ceilings or showcases. As a professional LED strip, under the premise of color rendering index Ra> 80, the light efficiency should be at least 60 lm/W. The lighting factory uses a dedicated continuous patch process to replace the PCB patch process to achieve efficient and automated production. The United Kingdom has innovated and developed high heat dissipation circuit boards. The commonly used LED strips for 5630led strips are 3528 and 5050 strips (3528 refers to the size of the LED light source, length 32mm wide and 28mm, and 5050 refers to the length and width of the LED light source. 50mm). On the one hand, the difference between the two is the size. On the other hand, there are 3 LED chips in the 5050 lamp beads. Therefore, under the same number of lamp beads, the brightness of the 5050 LED strip is 3 times that of the 3528 LED strip. The luminous flux of its leadless LED light strip is increased by more than 100% compared with the traditional light strip, and the energy-saving effect is increased by 100%-200%, so that the LED light strip can truly achieve energy saving and high brightness, and become an ultra-high-brightness lighting-level light strip.