Foshan 3528led lights with customization

LED (Light Emitting Diode, abbreviated as LED, the Chinese name is light-emitting diode.) The light strip refers to the assembly of LEDs on a strip-shaped FPC (flexible circuit board) or PCB hard board. The light strip adopts SMD5050, which is used Taiwan's high-brightness chip package, the luminous flux is 1-2lm higher than that of ordinary chips. A 5050 lamp bead has three chips. When one chip is damaged, it will not affect the other two chips to emit light. When only three cores are damaged, only a group of three 5050s will not light up, which will not affect the entire light strip. The 3528led light belt is named after its product shape is like a belt. Because of its long service life (generally 80 to 100,000 hours in normal life) and green environmental protection, it has gradually emerged in various decoration industries. General light strip products provide 3000K and 4000K color temperatures for selection. The power of 3528led light strip 2835led light strip is about 15W. The LED light strip is assembled with FPC as circuit board and assembled with SMD LEDs, so that the thickness of the product is only the thickness of a coin. The general specification is 30cm long, 18 LEDs, 24 LEDs and 15 LEDs, 24 LEDs, 30 LEDs, etc. with a length of 50cm. There are also 60cm, 80cm, etc. It can be cut and extended arbitrarily without affecting the luminescence. Bull LED strip products are available in 3 color temperatures, 3000K, 4000K and 5700K. Hotels, high-end shopping malls and home furnishings can choose a low color temperature below 3000K to create a warm atmosphere; the office can choose a cold light source with a higher color temperature. In today's LED lighting industry, market demands are becoming more and more diversified, and competition among companies is becoming more and more fierce. Seeking survival has become a top priority for companies. 3528led light strip installation light strip first cut according to the required length, take out the right amount of light strip, and then directly insert the side of the light strip with no patch position against the needle, when the needle is connected to the plug, the plug can be Powered up and used. In this process, it should be noted that the access point must be checked repeatedly to avoid leakage of water. Due to the long-term oversupply, consumers are no longer 'passive' in their choices, but are very keen on customized products. This is what we strive for, born for consumers.