Foshan 3528led lights offer
Cut light strip
The LED light strip is a circuit structure composed of 3/6 LEDs in series and parallel, and every 3 LEDs can be cut and used individually.
The cutting method of the light strip is that the blank space of every 3 or 6 lights on the light strip is a cutting place. If you cut it in other places, it will damage the circuit of this section of the light strip and cause the light strip to be damaged. .
The light color of the light strip should also be the same. If you want the light to have a uniform luminous effect, you must choose good color rendering when purchasing. The color rendering index Ra>80 is required for a professional LED light strip. Requirements. This is also a requirement of the national standard GB50034-2013. LED light strips are generally 220V, so they are wrapped with a thick layer of flame-retardant glue. Wires and circuit boards are generally made of copper. LED lamp beads determine the life of the light strip. 3528led light strips depend on the quality of the FPC. FPC is divided into two types: copper and rolled copper. The copper foil of the copper-clad board is protruding. If you look closely, it can be seen from the connection between the pad and the FPC. The rolled copper is closely connected with the FPC and can be bent at will without the phenomenon of pad falling off. If the copper-clad board is bent too much, the pad will fall off. If the temperature is too high during maintenance, it will also cause the pad to fall off. For the sake of electrical safety, you must not choose inferior quality. Hidden danger!