Foshan 3014LED flexible light bar customization

The light strip is generally installed in the dark groove, showing 'seeing the light but not the light'! Can make the space highlight the sense of hierarchy and increase the artistic conception! 3014LED flexible light bar is divided into colors, LED lights with 'colorfulTheoretically, LEDs can call out many colors, but these are the mainstream ones. Shipments are 'warm whiteThere are very few other colors. For 'warmnessThe true appearance of the light strip is like a belt. It uses an LED light source. As the name suggests, it is called an LED light strip. It can be turned on by directly connecting to the 220V mains. It is fixed with a fixed card and it is not difficult to install. The ED light strip is mainly installed in the light trough to create a large area of u200bu200bluminous ceilings and walls. The SMD5050 used in the 3014LED flexible light strip light strip is packaged with Taiwan's high-brightness chip, and the luminous flux is 1-2lm higher than ordinary chips. A 5050 lamp bead has three chips. When one chip is damaged, it will not affect the other two chips to emit light. When only three cores are damaged, only a group of three 5050s will not light, which will not affect the entire light strip. Shaping the effect of wall washing, it is precisely because of its large lighting range, so once a problem occurs, it will affect a wide range of light and shadow effects. When choosing LED strips, we must keep our eyes open and choose carefully. How to see the consistency of light color? You can find a piece of white paper, vertically close to the LED light-emitting surface, carefully observe the light and shadow on the white paper, LED2835 0.2w attached to the light and board, when the whole board is tested, there are a few lessons that do not light up, there are two possibilities for a single test piece to light up. , The first is that the local lamp bead connection circuit on the lamp board is open; the second is that the lamp bead itself is faulty, and a single lamp can be lit with a low current test, which does not mean that the entire board is working normally. Inspection method: Firstly, check whether the circuit between the lamp beads on the lamp board has an open-circuit and virtual soldering state, and then replace the lamp board to test whether the lamp bead of the lamp board is faulty. 3014LED flexible light bar can judge whether the light color is consistent, is it very simple?