Dongguan Waterproof High Voltage 2835LED Strip Production

During the decoration process, the lamp strip selection skills and the decoration effect are reflected. Introduction The lamp strip refers to the LED lamp is welded on the copper wire or strip-shaped flexible circuit board with a special processing technology, and then connected to the power supply to emit light, because its shape is like a strip when it emits light Named from the light belt. Waterproof high voltage 2835LED light strip 2835led light strip power is about 15W, the LED light strip is assembled with FPC circuit board, assembled with SMD LED, so that the thickness of the product is only the thickness of a coin. The general specification is 30cm long and 18 LEDs. , 24 LEDs and 50cm long 15 LEDs, 24 LEDs, 30 LEDs, etc. There are also 60cm, 80cm, etc. It can be cut and extended arbitrarily without affecting the luminescence. During the decoration process, the lamp belt selection skills and the decoration effect are introduced. With good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, and the light is uniform, and the brightness of the lamp strip should be consistent at the beginning and the end. When the waterproof high-pressure 2835 LED light strip is used for interior decoration, the back of each LED light strip is affixed with self-adhesive 3M double-sided tape. When installing, you can directly tear off the sticker on the surface of the 3M double-sided tape, and then fix the light bar. In the place that needs to be installed, just press it flat by hand. As for some places that require corners or are long, what should I do? Very simple, the LED light strip is a circuit structure composed of 3 LEDs in series and parallel, and each 3 LEDs can be cut and used individually. The light color of the light strip should also be consistent. If you want the light to have a uniform luminous effect, you must choose a good color rendering index when purchasing. The color rendering index Ra> 80 is a requirement that a professional LED light strip must meet. This is also a requirement of the national standard GB50034-2013. Finally, a principle is emphasized: choose products according to needs, and choose products according to the characteristics of the place. For example, we just said whether it will accumulate dust and whether it needs to have a sheath. The waterproof high-pressure 2835LED light strip flexible LED light strip uses FPC as an assembly circuit board, and is assembled with SMD LEDs, and the thickness is only the thickness of a coin; Common specifications include 30cm long 18 LEDs, 24 LEDs, and 50cm long 15 LEDs. There are also 60cm, 80cm, etc., which can be cut at will or extended at will without affecting the light emission. It can be bent, folded, and wound arbitrarily, suitable for use in irregular places and places with small spaces. Don't just see the advantages of the protective cover, its disadvantage is that it may lose a little light. Therefore, it is necessary to understand the product, understand the application place, understand the demand, and choose the right product.