Dongguan No Dark Zone 3014LED Strip Production

In fact, people without relevant knowledge and experience are easily deceived and buy low-quality light strips. However, experienced people still have a way to identify, the LED light strips produced by regular manufacturers and the LED light strips of cottages can be seen at a glance from the appearance. The 3014 LED strips without dark areas are divided into different colors. The LED strips have 'colorfulTheoretically, LEDs can call out many colors, but these are the mainstream ones. Shipments are 'warm whiteThere are very few other colors. If you want a sense of warmth, choose 'warm white'; if you want a sense of lightness, choose 'cool white'; if you want a sense of fashion, choose 'blue'. The following Shenzhen Lighting Factory introduced us to the identification techniques of the quality of LED light strips, to see how to identify the quality of LED light strips by eyes. Using a very soft PCB board with a thickness of 2MM as the substrate, the 3014 LED light strip with no dark area will be packaged in an anti-static reel. Generally, it will be 5 meters per roll or 10 meters per roll, and then anti-static The static and moisture-proof packaging bag is sealed. The counterfeit version of the LED light belt will use recycled reel for cost saving, and then there is no anti-static and moisture-proof packaging bag. If you look carefully at the reel, you can see that there are marks and scratches left by the removal of the label on the outside. Easy to install and fix. Flexible and convenient cutting makes construction and operation convenient, ultra-thin design, low-temperature light source, so that the product is more flexible in the selection and matching of auxiliary materials during the installation process. The light strip is not only beautiful, but also can increase the auxiliary lighting of the space. No dark area 3014LED light strip The LED light strip produced by the regular LED light strip manufacturer is produced by SMT patch technology, using solder paste and reflow soldering process. . Therefore, the solder joints on the LED light strip are relatively smooth and the amount of solder is small, and the solder joints extend from the FPC pad to the LED electrode in a circular arc shape. However, the amount of solder in the solder joints of the counterfeit version of the LED light strip is uneven, and most of the solder feet are covered by a dot, and at the same time there will be different degrees of tin tips, which is a typical phenomenon of manual soldering. Make the space brighter and easier to highlight personality and style. Visually it is more spacious and brings an unparalleled and wonderful view to the interior.